Mix the crackle glaze well. Apply in one direction and allow to dry. This coat must be smooth and even. If not, remove the glaze with a damp cloth and re-apply, working it into the surface with the brush before laying off to a smooth even coat. Apply the topcoat of matt emulsion, thinned with water to produce an easily flowing paint. Painted walls that take on a bubbly appearance are the result of a loss of adhesion between the paint and the underlying surface of the wall.
The lack of adhesion is usually caused by moisture, heat, or a combination of the two. Exposing latex paint to moisture immediately after it has dried. Brush a coat of Mod Podge on the surface, doesn't seem to matter how thick. Let the Mod Podge dry, at least mostly, it takes about a minute. Then, brush on your chosen paint color.
Just as with regular crackle medium, it will take several hours for the cracks to fully develop. Apply the Crackle Medium Brush a coat of clear crackle-finish medium onto the piece.
The crackle glaze usually takes 30 minutes to an hour to dry; follow the manufacturer's directions. Use a flat latex or acrylic paint for the top coat, otherwise the crackling may not happen. Brush the paint over the glue while it is still tacky to achieve the crackle effect.
Brush only once over the glue, rather than using several brushstrokes in the same area, or you may hinder the crackling process. Apply the top coat by dabbing with a sponge for small cracks that go in all directions. You can antique, shade or paint over the dry, crackled surface before sealing or seal the piece with a light coat of matte spray and then antique, shade or paint on the sealed surface.
The final seal should be quite heavy. Anyway, if you don't like the way your piece turns out, you can always change the look! Paint can always be painted over , even paint that's been crackled. Of course, the finish will require some sanding before you can paint a smooth coat of paint over it. A few different factors can cause the finish to wrinkle or crack when applying another coat of paint. The most common — is applying the paint too thickly — which makes the surface of the paint dry too fast and not the underside.
Leave the top coat to dry for two to four hours. Love the shabby chic trend? Spruce up your tired furniture with a simple vintage, crackled paint effect to get this must-have interior style. Steps Protect your surroundings with newspaper and dust sheets. Sign up for our newsletter and get a free book of ideas. Thanks for signing up, please Click Here to view the previous issues. Share this. There are several ways to create a contemporary crackle effect, but the simplest is to use a three-step kit.
Sand the entire surface of the door that you wish to crackle glaze with grit sandpaper. This will help the top coat adhere to the door without having to strip the existing paint.
Roll on the crackle glaze, working in vertical strokes until the door is completely covered.
0コメント